Show Logging Session Condition - Avaya G250 Reference

CLI Commands
User level
read-only
Context
general
Example
To display filter conditions defined for the Syslog server at IP address 172.16.1.139:
G350-001(super)# show logging server condition 172.16.1.139
Logging: enabled
Logging severity: warning
Facility
-------------
System
Syslog server 222.222.222.222
Logging: enabled
Logging severity: Debug
Facility
-------------
Kernel
Related commands
clear logging file,
access-level, set logging server
facility, set logging

show logging session condition

Use the show logging session condition command to display the filter conditions
defined for message logging to the current console session.
Syntax
show logging session condition
User level
read-only
646 Avaya G250 and Avaya G350 CLI Reference
Severity Override
-----------------------
Critical
Severity Override
-----------------------
Critical
clear logging server, set logging
condition,
session, show logging file
file, set logging
set logging server enable/disable,
content, show logging session condition
server, set logging server
set logging server