Show Rtr Operational-State - Avaya G250 Reference

CLI Commands
Output fields:
Field
Type
Target Address
Frequency
Wait Interval
Success Retries
Failure Retries
DSCP
Source Address
Next-Hop Interface
Next-Hop Mac Address
Related commands
rtr, rtr-schedule,

show rtr operational-state

Use the show rtr operational-state command to display the global operational status of
the RTR feature, for a specific RTR operation or for all RTR operations.
Syntax
show rtr operational state [rtr-id]
698 Avaya G250 and Avaya G350 CLI Reference
Description
The configured RTR type. The supported types are:
The destination IP address of the probe packet. That is,
the address being monitored.
The time in milliseconds between successive RTRs.
The amount of time in milliseconds to wait for a response
to a probe before considering it an unanswered probe.
The number of successive answered probes that will
change the status of the RTR operation from down to up.
The number of successive unanswered probes that will
change the status of the RTR operation from up to down.
The DSCP value of the probe packet.
The source IP address of the probe packet (displayed
only if configured).
The interface through which to route the probe packet,
bypassing the normal route (displayed only if configured).
The next hop mac-address for Ethernet interfaces.
show rtr operational-state
IP/ICMP Echo
TCP Connection