Set Lldp Tx-Hold-Multiplier - Avaya G250 Reference

set lldp tx-hold-multiplier

Use the set lldp tx-hold-multiplier command to set the TxHoldMultiplier. This
parameter is a multiplier on the TxInterval that determines the actual TTL value sent in an LLDP
frame. The time-to-live value transmitted in TTL TLV by the device is expressed by the following
formula:
TTL = min(65535, TxInterval * TxHoldMultiplier)
Syntax:
set lldp tx-hold-multiplier number
Parameters
Parameter
number
User level
read-write
Context
General
Example
G250-001(super)# set lldp tx-hold-multiplier 4
Related commands
set lldp re-init-delay,
set port lldp tlv,
config
Description
The multiplier
set lldp system-control,
show lldp, show lldp config,
Alphabetical listing of CLI commands
set lldp tx-delay, set lldp
show port lldp config,
Possible Default
Values Value
2-10 30
tx-interval, set port
show port lldp vlan-name
Issue 1.1 June 2005
lldp,
415