Ip Route - Avaya G250 Reference

CLI Commands

ip route

Use the ip route command to establish a static route. Use the no form of this command to
remove a static route.
Syntax
[no] ip route ip_addr mask
{{next_hop [next_hop [next_hop]] | interface_type interface_number}
[cost] [preference] [permanent] | Null0}
Note:
If you wish to establish a route through the Fast Ethernet interface on which
Note:
DHCP address negotiation is configured, you cannot specify the next hop, but
you must specify the interface type as the Fast Ethernet interface.
Parameters
Parameter
ip_addr
mask
next_hop
interface_type
interface_number
cost
preference
permanent
Null0
User level
read-write
Context
general
278 Avaya G250 and Avaya G350 CLI Reference
Description
The IP address of the network
The mask of the static route
The next hop address in the network
The interface type
The interface number
The path cost
The preference of the route
Keyword that specifies that the route is not
disabled if the interface is down
Keyword that creates a static discard route
Possible Default
Values Value
1
High, Low
Low