Fragment Chain - Avaya G250 Reference

fragment chain

Use the fragment chain command to set the maximum number of fragments that can
comprise a single IP packet destined to the router. Use the no form of this command to set the
fragment chain to its default value.
Note:
No IP reassembly is performed on packets in transit through the router.
Note:
Syntax
fragment chain chain_limit
no fragment chain
Parameters
Parameter
chain_
limit
User level
read-write
Context
general
Example
To set the maximum number of fragments for a single IP packet to 30:
G350-001(super)# fragment chain 30
Related commands
clear fragment,
Description
The maximum number of fragments that can
comprise a single IP packet
fragment size, fragment
Alphabetical listing of CLI commands
timeout, show fragment
Possible Default
Values Value
2-2048 64
Issue 1.1 June 2005 191