Test-Rate-Limit - Avaya G250 Reference

Syntax
test voip-dsp
User level
read-write
Context
general
Example:
To start a BTR test:
G350-001(super)# test voip-dsp
DSP TEST RESULTS
--------------------------
DSP 0
DSP 1
Related commands
busyout voip-dsp,

test-rate-limit

Use the test-rate-limit command to configure the CNA test rate limiter. The CNA test rate
limiter sets the maximum rate of tests that can be run by the CNA test plug embedded in the
G250/G350. Use the no form of the command to return the CNA test rate limiter to its default
configuration.
Syntax
test-rate-limit maxTests interval
Parameters
Parameter
maxTests
interval
PASS
PASS
release voip-dsp, show voip-parameters
Description
The maximum number of tests allowed in an interval.
Zero means no limit.
The rate limiter interval, in seconds.
Alphabetical listing of CLI commands
Possible
Values
0-10000
1-1000
Issue 1.1 June 2005
Default
Value
60
10
771