Show Rtp-Stat Config - Avaya G250 Reference

show rtp-stat config

Use the show rtp-stat config command to display the RTP statistics application
configuration.
Syntax
show rtp-stat config
User level
read only
Context
General
Example
To display the current configuration of the RTP statistics application:
G350-001(super)# show rtp-stat config
RTP Statistic: Enabled
QoS Trap: Enabled
QoS Fault Trap: Enabled
Fault: 1
Clear: 0
QoS Trap Rate Limiter:
Token Interval: 10.00 seconds
Bucket Size: 5
Session Table:
Size: 128
Reserved: 64
Min Stat Win: 50
Note:
For an explanation of the output fields, see the table describing the output of the
Note:
show rtp-stat config command in the chapter Configuring monitoring
applications, in Administration for the Avaya G250 and Avaya G350 Media
Gateways, 03-300436.
Related commands
rtp-stat clear, rtp-stat
rtp-stat qos-trap-rate-limit,
rtp-stat sessions,
event-threshold, rtp-stat
rtp-stat service,
show rtp-stat summary,
Alphabetical listing of CLI commands
fault, rtp-stat min-stat-win,
rtp-stat threshold, show rtp-stat
show rtp-stat thresholds
rtp-stat qos-trap,
detailed, show
Issue 1.1 June 2005 689