CLI Commands
Parameters
Parameter
ip_net
User level
read-write
Context
Interface: FastEthernet (L2-L3, L2), VLAN (L2-L3, L2)
Example
To select the network 192.168.169.0 as the network from which an address should be allocated
for BOOTP/DHCP requests:
G350-001(if:Vlan 1.20)# ip bootp-dhcp network 192.168.169.0
Related commands
ip bootp-dhcp
ip bootp-dhcp relay
Use the ip bootp-dhcp relay command to enable relaying of BOOTP and DHCP requests
to the BOOTP/DHCP server. Use the no form of this command to disable relaying of BOOTP
and DHCP requests.
Syntax
[no] ip bootp-dhcp relay
User level
read-write
Context
general
226 Avaya G250 and Avaya G350 CLI Reference
Description
The IP subnet
relay,
ip bootp-dhcp server
Possible
Default
Values
Value