Mode - Avaya G250 Reference

Example
To create a map class named mySVoip1:
G350-001(super)# map-class frame-relay mySVoip1
G350-001(super-map-class)#
Related commands
clear frame-relay
frame-relay pvc

mode

Use the mode command to set the IPSec encapsulation mode. Use the no form of the
command to return the value to the default encapsulation mode, which is tunnel mode.
Note:
Transport mode cannot be used unless the remote VPN peer supports Transport
Note:
mode and is configured to use it.
Syntax
[no] mode {tunnel | transport}
Parameters
Parameter
tunnel
transport
User level
read-write
Context
crypto ipsec transform-set
Example
G350-001(config-transform:ts1)# mode tunnel
counters, frame-relay
brief, show interfaces
Description
IPSec VPN tunnel mode. This is the default
setting.
IPSec VPN transport mode.
Note: Specify this mode only for a GRE
tunnel.
Alphabetical listing of CLI commands
class-dlci, interface serial, show frame-relay map,
Possible Default
Values Value
Issue 1.1 June 2005
show
327