CLI Commands
ip address negotiated
Use the ip address negotiated command to enable obtaining an IP address via PPP/
IPCP negotiation. Use the no form of this command to disable IP address negotiation.
Note:
The ip address negotiated command is intended primarily for PPPoE and
Note:
dialer modem.
Note:
When you release a negotiated IP address using no ip address
Note:
negotiated, any DNS information is removed as well.
Note:
You cannot configure both DHCP address negotiation and PPP/ICMP address
Note:
negotiation on the Fast Ethernet interface.
Syntax
[no] ip address negotiated
User level
read-write
Context
Interface: Dialer, FastEthernet (PPPoE only)
Example
G350-001(config-if:FastEthernet 10/2)# ip address negotiated
Related commands
ppp ipcp dns request
ip admin-state
Use the ip admin-state command to set the administrative state of an IP interface. The
default state is up.
Syntax
ip admin-state up|down
224 Avaya G250 and Avaya G350 CLI Reference