Set Port Vlan - Avaya G250 Reference

User level
read-write
Context
general
Example
To enable uplink and downlink traps for port 2 of module 3 on the G350:
G350-147# set port trap 3/2 enable
Port 3/2 up/down trap enabled.
Related commands - SNMP access configuration
ip snmp-server,
snmp, show snmp
snmp user, show snmp user
community, snmp-server
user, snmp-server view
Related commands - SNMP trap configuration
clear snmp trap,
notifications, snmp-server
Related commands - Dynamic trap manager
snmp-server dynamic-trap-manager

set port vlan

Use the set port vlan command to set the port VLAN ID (PVID).
Note:
You need to define a VLAN before setting a port VLAN ID.
Note:
Syntax
set port vlan vlan_num module/port
set snmp community,
engineID, show snmp
summary,
engineID, snmp-server
set snmp trap, show
host, snmp-server informs
set snmp retries, set snmp
group, show snmp
show snmp usertogroup,
group, snmp-server
snmp, snmp trap link-status,
Alphabetical listing of CLI commands
timeout, show port
retries, show snmp timeout,
show snmp view,
remote-user,
snmp-server enable
Issue 1.1 June 2005
trap, show
show
snmp-server
snmp-server
467