Set Lldp Re-Init-Delay - Avaya G250 Reference

CLI Commands
Example
G250-001(super-survivable-call-engine)# set ip-codec-set g.711mu
IP codec g.711mu is set
Related commands
add trunk-group,
trunk-group, remove
extension, set
trunk-group, show
ip-codec-set, show
show trunk-group,

set lldp re-init-delay

Use the lldp re-init-delay command to set the reinitDelay. This sets the delay from when
a port is set to LLDP "disable" until re-initialization is attempted.
Syntax
set lldp re-init-delay value
Parameters
Parameter
value
User level
read-write
Context
General
Example
G250-001(super)# set lldp re-init-delay 5
412 Avaya G250 and Avaya G350 CLI Reference
clear ars-fac, clear
trunk-group, save
extension-password, set
ars-fac, show date-format,
last-pim-update,
survivable-call-engine
Description
The delay in seconds from when a port is set to
LLDP "disable" until re-initialization will be
attempted
survivable-config, clear
config, set ars-fac,
max-ip-registrations,
show dial-pattern,
show max-ip-registrations,
dial-pattern, clear extension,
set date-format, set dial-pattern,
set survivable-call-engine,
show extension,
show survivable-call-engine,
Possible
Values
1-10
clear
set
set
show
Default
Value
2