Disable Scheduled Maintenance And Alarm Origination To Inads; Check Link Status - Avaya CMC1 Installation, Upgrades And Additions

Upgrading R6csi/R7csi/R8csi to Avaya MultiVantage
Software on an Avaya DEFINITY Server CSI
If any command does not complete successfully, escalate the problem
immediately.
Disable Scheduled Maintenance and Alarm
Origination to INADS
1. Type change system-parameters maintenance and press
2. If scheduled maintenance has begun, set the Stop Time field to 1 minute
after the current time.
or
If scheduled maintenance has not begun, set the Start Time field to a
time after the upgrade will be completed. For example, if you start the
upgrade at 8:00 p.m. and the upgrade takes 90 minutes, set the Start
Time field to 21:30.
!
3. Type neither in the Alarm Origination to OSS Numbers field and
press

Check Link Status

1. Enter display communication-interface links and press
all enabled links
2. Type status link number and press
3. Write down which links are in service.
3-14
Issue 5 October 2002
CAUTION:
If you do not disable Alarm Origination, the system may generate
alarms, resulting in unnecessary trouble tickets.
Enter.
NOTE:
Disabling alarm origination prevents the system from generating
alarms, thus preventing unnecessary trouble tickets.
For some DEFINITY ECS software versions, set the Cleared
Alarm Notification and Restart Notification fields to
disable before pressing .
Enter
for each enabled link.
Enter
.
Enter
. Write down
Enter
555-233-118