Copy Running-Config Startup-Config; Copy Running-Config Tftp - Avaya G250 Reference

copy running-config startup-config

Use the copy running-config startup-config command to commit the current
configuration to NVRAM.
Syntax
copy running-config startup-config
User level
read-write
Context
general
Example
G350-001(super)# copy running-config startup-config
Related commands
copy ftp startup-config,
tftp, copy startup-config
startup-config,
show erase status,

copy running-config tftp

Use the copy running-config tftp command to upload the current configuration to a file
on a TFTP server. Uncommitted changes to the configuration are included.
To use this command, you need to have an active TFTP server. If Avaya Network Manager is
running, you do not require an additional TFTP server.
Note:
After you change the configuration, run the copy running-config
Note:
startup-config command to save the changes. If you do not save the
changes, the device loses the changes when you reset it.
Syntax
copy running-config tftp filename ip
copy running-config
ftp, copy startup-config
erase startup-config, nvram
show logging file
ftp, copy running-config
scp, copy startup-config
initialize, show copy
condition, show running-config,
Alphabetical listing of CLI commands
scp, copy running-config
tftp, copy tftp
status, show download
show startup-config
Issue 1.1 June 2005
status,
121