Keepalive-Icmp Interval; Keepalive-Icmp Source-Address - Avaya G250 Reference

CLI Commands

keepalive-icmp interval

Use the keepalive-icmp interval command to set the interval (in seconds) between
keepalive packets. Using this command without a parameter resets the interval value to the
default value.
Syntax
keepalive-icmp interval seconds
Parameters
Parameter
seconds
User level
read-write
Context
Interface: FastEthernet
Example
G350-001(if:FastEthernet 10/2)# keepalive-icmp interval 5
Related commands
keepalive-icmp,
success-retries,

keepalive-icmp source-address

Use the keepalive-icmp source-address command to set the source IP address of the
keepalive packets. Using this command without a parameter sets the source IP address to the
default value, which is the interface's primary IP address.
Syntax
keepalive-icmp source-address source_ip_address
310 Avaya G250 and Avaya G350 CLI Reference
Description
The interval time (in seconds)
keepalive-icmp failure-retries,
keepalive-icmp timeout,
keepalive-icmp source-address,
show keepalive-icmp
Possible Default
Values Value
1-36 5
keepalive-icmp