Set Trunk-Group - Avaya G250 Reference

CLI Commands
Example
To configure 802.1q VLAN tagging for port 3 of module 3 in the G350:
G350-001(super)# set trunk 3/3 dot1q
Dot1Q VLAN tagging set on port 3/3.
Related commands
clear port static-vlan,
port vlan-binding-mode,
show vlan

set trunk-group

Use the set trunk-group command to configure a trunk group in the SLS data set on the
G250. There can be a maximum of four trunk groups for the G250. If you attempt to assign
more than the maximum, you must delete a trunk group before you can add a new one.
Note:
This command is supported by the Avaya G250-Analog; it is not supported on the
Note:
G250-BRI or the G350.
Syntax
set trunk-group tgnum dial tac type
Parameters
Parameter
tgnum
dial
tac
type
User level
read-write
506 Avaya G250 and Avaya G350 CLI Reference
clear vlan, icc-vlan, interface
set vlan, show cam
Description
Trunk group number
Dial type
Trunk access code (optional). One to four
digits, which can include # or * as the
leading digit only. Must be unique across all
trunk groups.
Trunk type (optional)
vlan, set port static-vlan,
vlan, show port vlan-binding-mode,
set port vlan,
show trunk,
Possible Default
Values Value
1-2000
rotary
dtmf
loop-start
set