Show Composite-Operation - Avaya G250 Reference

Name
Last Test
Result
Test
Count
Failed
Cancelled
Related commands
clear counters (CNA test
rtp-test-port, scheduler,

show composite-operation

Use the show composite-operation command to display information about a specific
composite-operation. Use the command without a parameter to display information about all
composite-operations.
Syntax
show composite-operation [composite_operation_index]
Description
The current or last test performed by the test plug. Possible values:
none. No test has been performed since the test plug was up.
traceRoute. The current/last test performed is/was a traceroute
test.
rtp. The current/last test performed is/was an RTP test.
ping. The current/last test performed is/was a ping test.
tcpConnect. The current/last test performed is/was a
TCPConnect test.
merge. The current/last test performed is/was a merge test.
The results of the last test run.
The types of tests.
The number of tests of each type that was run since the test plug was
up.
The number of tests of each type that failed.
The number of tests of each type that was cancelled.
plugs), cna-testplug, cna-testplug-service, control-port, rtp-echo-port,
shutdown (CNA test plugs),
Alphabetical listing of CLI commands
test-rate-limit
Issue 1.1 June 2005 521