Related commands - Policy
composite-operation, destination-ip, icmp,
tcp
destination-port,
name
dscp (object tracking)
Use the dscp command to set the DSCP value for the packets of the RTR probes. Use the no
form of this command to restore the value to the default value of 48.
Syntax
[no] dscp dscp
Parameters
Parameter
dscp
User level
read-write
Context
rtr type
Example
To set the DSCP value for RTR 1:
G350-001(config-rtr icmp 1)# dscp 42
Related commands
fail-retries, frequency,
wait-interval
tcp
established,
tcp
source-port,
Description
The dscp value
next-hop (object
tracking), rtr, source-address, success-retries, type,
Alphabetical listing of CLI commands
show
composite-operation,
udp
destination-port,
Possible Values
0-63
show
ip-rule, source-ip,
udp
source-port, cos,
Default Value
48
Issue 1.1 June 2005
175