Alphabetical Listing Of Cli Commands; Add Trunk-Group - Avaya G250 Reference

Alphabetical listing of CLI commands

add trunk-group

Use the add trunk-group command to add a port to a trunk group in the SLS data set on the
G250. A trunk port can belong only to a single trunk group.
Note:
This command is supported by the Avaya G250-Analog; it is not supported on the
Note:
G250-BRI or the G350.
Syntax
add trunk-group tgnum port
Parameters
Parameter
tgnum
port
User level
read-write
Context
You must be in the survivable-call-engine context before the add trunk-group command will
work.
Example
G250-001(super-survivable-call-engine)# add trunk-group 13 v301
Port v301 was added to Trunk Group 13
Related commands
clear ars-fac, clear
remove trunk-group,
Description
Trunk group number
Port number
survivable-config, clear
save config, set ars-fac,
Alphabetical listing of CLI commands
dial-pattern, clear extension,
set date-format, set
Possible Default
Values Value
1-2000
v301,
v302,
v303,
v304
clear trunk-group,
dial-pattern, set extension,
Issue 1.1 June 2005
set
37