Clear Survivable-Config; Clear Sync Interface - Avaya G250 Reference

clear survivable-config

Use the clear survivable-config command to set the SLS parameters in the G250 to
their default values.
Note:
This command is supported by the Avaya G250-Analog; it is not supported on the
Note:
G250-BRI or the G350.
Syntax
clear survivable-config
User level
read-write
Context
You must be in the survivable-call-engine context before the clear survivable-config
command will work.
Example
G250-001(super-survivable-call-engine)# clear survivable-config
Survivable-call-engine configuration is cleared
Related commands
add trunk-group,
trunk-group, save
extension-password,
trunk-group, show
ip-codec-set, show
show trunk-group,

clear sync interface

Use the clear sync interface command to disassociate a previously specified interface
as the primary or secondary clock synchronization source.
Note:
The primary interface must be disassociated before the secondary interface is
Note:
disassociated.
clear ars-fac, clear dial-pattern,
config, set ars-fac, set
set ip-codec-set, set
ars-fac, show date-format,
last-pim-update, show
survivable-call-engine
Alphabetical listing of CLI commands
clear extension,
date-format, set dial-pattern,
max-ip-registrations,
show dial-pattern,
max-ip-registrations,
clear trunk-group, remove
set extension, set
set survivable-call-engine,
show extension, show
show survivable-call-engine,
Issue 1.1 June 2005
set
91