Ip Crypto-Group - Avaya G250 Reference

Parameters
Parameter
capture_list_id
User level
read-write
Context
general
Example
G350-001(super)# ip capture-list 501
G350-001(super-Cap 501)#
Related commands
capture buffer-mode,
max-frame-size,
capture, show capture-buffer hex

ip crypto-group

Use the ip crypto-group command to activate a crypto-list in the context of the interface on
which the crypto-list is activated. The command applies to the following interfaces:
Serial
FastEthernet
Dialer
Use the no form of the command to deactivate a crypto-list.
Note:
The ip crypto-group command applies also to the VLAN interface, but this
Note:
option is not recommended.
Note:
Most IPSec VPN parameters cannot be modified if they are linked to an active
Note:
crypto-list. To modify a parameter linked to an active crypto-list, you must first
deactivate the list using the no ip crypto-group command in the context of
the interface on which the crypto-list is activated.
Description
The capture list number
capture buffer-size,
capture start, capture
Alphabetical listing of CLI commands
capture filter-group,
stop, capture-service,
Possible Default
Values Value
500-599
capture interface, capture
clear capture-buffer, name,
Issue 1.1 June 2005
show
229