Show Crypto Ipsec Transform-Set - Avaya G250 Reference

CLI Commands
Name
Transform
&
PFS
&
Secs left
&
KB left
&
Mode
Related commands
clear crypto isakmp,
crypto ipsec transform-set,
crypto isakmp
crypto-list

show crypto ipsec transform-set

Use the show crypto ipsec transform-set command to display the configuration for
the specified transform-set or all transform-sets.
Syntax
show crypto ipsec transform-set [transform-set-name]
Parameters
Parameter
transform-set-name
534 Avaya G250 and Avaya G350 CLI Reference
Description
Lists all the transforms being used by the SA. Each transform is listed
in a separate row.
Displays information about PFS (Perfect Forward Secrecy) usage,
when the SA is negotiated by IKE Phase-2. Possible values are:
No - PFS is not used.
#<N> - PFS is used with Diffie-Hellman group N.
The number of seconds left for this SA's expiration.
The number of kilobytes left for this SA's expiration.
The encapsulation mode: tunnel or transport.
* This parameter appears when the detail keyword is specified.
#
This parameter appears when IP Payload Compression (IPPCP) is used.
&
The SA table is displayed only when active SAs exist for the rule.
clear crypto sa,
show crypto isakmp
policy, show crypto isakmp
Description
The name of the transform set you wish to
display. If you do not enter a value, all
transform-sets are displayed.
clear crypto sa counters,
peer, show crypto isakmp
sa, show crypto
crypto ipsec transform-set,
peer-group,
map, show ip active-lists,
Possible
Values
show
show
show ip
Default
Value