Ip Dhcp Client Lease - Avaya G250 Reference

ip dhcp client lease

Use the ip dhcp client lease command to set the lease requested by the DHCP client.
Use the no form of this command to specify the default behavior, which is that the client does
not request a lease from the DHCP server.
Syntax
[no] ip dhcp client lease days [hours [minutes]]
Parameters
Parameter
days
hours
minutes
User level
read-write
Context
Interface: Fast Ethernet
Examples
G350-001(config-if:FastEthernet 10/2)#ip dhcp client lease 1 4 15
G350-001(config-if:FastEthernet 10/2)#ip dhcp client lease 1 2
G350-001(config-if:FastEthernet 10/2)#ip dhcp client lease 1
Related commands
clear ip dhcp-client
ip dhcp client request,
statistics
Description
The lease time, in D H M
format
statistics, ip address dhcp,
release dhcp, renew
Alphabetical listing of CLI commands
Possible Values
Minimum value:
0 0 1
ip dhcp client client-id,
dhcp, show ip dhcp-client,
Default Value
No lease
requested from the
server
ip dhcp client hostname,
show ip dhcp-client
Issue 1.1 June 2005 235