CLI Commands
set dscp
Use the set dscp command to set the DSCP value in the tunneled packet. Use the no form of
this command to take the DSCP value from the original header (default setting).
Syntax
[no] set dscp dscp-value
Parameters
Parameter
dscp-value
User level
read-write
Context
crypto map
Examples
G350-001(config-crypto:1)# set dscp 10
G350-001(config-crypto:1)# no set dscp
Related commands
continuous-channel,
transform-set
406 Avaya G250 and Avaya G350 CLI Reference
Description
The static DSCP value in the DS field of the
tunneled packet. The default setting is
no set dscp, which specifies that the
DSCP is copied from the DS field of the
original packet.
description (crypto
map),
set peer (crypto
map),
Possible
Default
Values
Value
0-63
set
peer-group,
set