Show Ip Ospf Interface - Avaya G250 Reference

CLI Commands

show ip ospf interface

Use the show ip ospf interface command to display OSPF-related interface information.
If no interface name is specified, information for all interfaces is displayed.
Syntax
show ip ospf interface [interface_name]
Parameters
Parameter
interface_name
Note:
To specify an interface name that includes spaces, enclose the entire name in
Note:
quotation marks (for example, "New York").
User level
read-only
Context
general
Example
To display OSPF information for all interfaces:
G350-001(super)# show ip ospf interface
sh ip ospf interface
Showing 1 OSPF Interfaces
Vlan 1.0 is up
Internet Address 1.1.1.1, Mask 255.255.255.0
AS Router ID 1.1.1.1, COST 1
Transmit Delay 1, State DR,
DRId 1.1.1.1, IpAddress 1.1.1.1
BDRId is 0.0.0.0, IpAddress 0.0.0.0
Timer Intervals Configured:
Hello 10
Dead 40
Retransmit 5
Neighbor count 0
608 Avaya G250 and Avaya G350 CLI Reference
Description
The OSPF interface name
Priority 1
Possible
Values
string
, Area 0.0.0.0
Default
Value