Show Ip-Rule - Avaya G250 Reference

CLI Commands

show ip-rule

Use the show ip-rule command to display the attributes of a specific rule. Leave the
rule_number parameter blank to display all rules.
Syntax
show ip-rule [rule_number]
Parameters
Parameter
rule_number
User level
read-write
Context
ip access-control-list, ip access-control-list/ip-rule, ip qos-list, ip qos-list/ip-rule, ip capture-list,
ip capture-list/ip-rule, ip pbr-list, ip pbr-list/ip-rule
Example
To display information about ip rule 22 in access-control-list 320:
G350-001(ACL 320/ip rule 22)# show ip-rule 22
I.D. Protocol
----- -------- --- ---------------- --------- ----------
22 Ip
Related commands - Policy-based routing: ip pbr-list
destination-ip,
routing), show ip next-hop-list
Related commands - Policy-based routing: ip pbr-list: ip-rule
ip-rule (policy, policy-based routing, packet
634 Avaya G250 and Avaya G350 CLI Reference
Description
The specific rule for which attributes are
displayed
IP Wildcard
Src Any
Dst Any
dscp (policy, policy-based routing, packet
Port Operation
permit
sniffing),
sniffing), name, owner,
Possible Default
Values Value
next-hop (policy-based
show list