Fragment Timeout - Avaya G250 Reference

fragment timeout

Use the fragment timeout command to set the maximum number of seconds to reassemble
a fragmented IP packet destined to the router. Use the no form of this command to set the
fragment timeout to its default value.
Note:
No IP reassembly of packets in transit through the router is performed.
Note:
Syntax
fragment timeout timeout
no fragment timeout
Parameters
Parameter
timeout
User level
read-write
Context
general
Example
To set the maximum time to reassemble packets to be 30 seconds:
G350-001(super)# fragment timeout 30
Related commands
clear fragment,
Description
The maximum number of seconds to
reassemble an IP packet
fragment chain, fragment
Alphabetical listing of CLI commands
size, show fragment
Possible Default
Values Value
5-120 10
Issue 1.1 June 2005 193