Show Vlan - Avaya G250 Reference

CLI Commands
User level
read-write
Context
general
Example
To display utilization information for all modules:
G350-001(super)# show utilization
Mod CPU
5sec
--- ------
10 4%
Related commands
set utilization cpu,
restart-log, show

show vlan

Use the show vlan command to display the VLANs configured in the media gateway. If no
VLAN is specified, information for all VLANs is displayed.
Syntax
show vlan [vlan_id | name vlan_name]
Parameters
Parameter
vlan_id
name
vlan_name
User level
read-only
730 Avaya G250 and Avaya G350 CLI Reference
CPU RAM
60sec used(%)
----- -------
4% 21%
show faults, show mg
system, show temp, show
Description
VLAN number to display
Keyword indicating to specify the VLAN by name
VLAN name to display
RAM
Total(Kb)
----------
105313 Kb
list_config, show mgc,
voltages, test led
show mm, show module,
Possible Default
Values Value
1-3071
show