Show Port Lldp Vlan-Name Config - Avaya G250 Reference

CLI Commands
Output fields
Field
Port Number
Port Status
Port Description
System Name
System
Description
System
Capability
Management
Address
PVID
Related commands
set lldp re-init-delay,
tx-interval, set port
config

show port lldp vlan-name config

Use the show port lldp vlan-name config command to show the VLANs that are being
transmitted on a specific port
Syntax:
show port lldp vlan-name config [module/port]
668 Avaya G250 and Avaya G350 CLI Reference
Description
The ports on which LLDP is configured.
The LLDP status of the port. Possible values:
disable — The LLDP agent neither transmits nor receives
LLDP frames on this port.
tx-only — The LLDP agent transmits LLDP frames on this port
but does not store any information about the remote systems
connected.
rx-only — The LLDP agent receives, but does not transmit,
LLDP frames on this port.
rx-and-tx — The LLDP agent both transmits and receives
LLDP frames on this port (default).
Whether the Port Description TLV is transmitted (enable) or not
transmitted (disable) from the port.
Whether the System Name TLV is transmitted (enable) or not
transmitted (disable) from the port.
Whether the System Description TLV is transmitted (enable) or not
transmitted (disable) from the port.
Whether the System Capability TLV is transmitted (enable) or not
transmitted (disable) from the port.
Whether the Management Address TLV is transmitted (enable) or not
transmitted (disable) from the port.
Whether the Port-VLAN-ID (PVID) TLV is transmitted (enable) or not
transmitted (disable) from the port.
set lldp system-control,
lldp, set port lldp tlv, show
set lldp tx-delay, set lldp
lldp, show lldp config,
tx-hold-multiplier, set lldp
show port lldp vlan-name