Dialer Order - Avaya G250 Reference

CLI Commands
Example
G350-001(if:Dialer 1)# dialer modem-interface console
Related commands
interface dialer,
delay, dialer persistent
wait-for-ipcp

dialer order

Use the dialer order command to set which dial strings are used upon a new dial trigger
event. Use the no form of the command to clear the order. The default value is sequential.
Syntax
[no] dialer order {sequential | round-robin | last-successful}
Parameters
Parameter
sequential
round-
robin
last-
successful
User level
read-write
Context
interface dialer
Example
G350-001(if:Dialer 1)# dialer order last-successful
162 Avaya G250 and Avaya G350 CLI Reference
dialer order, dialer persistent,
max-attempts,
Description
Restart from beginning of dial list.
Restarts dialing using the dial string following
the most recently used dial string.
Restarts dialing using the most recently
successful string and continues to the next dial
string in a list if a call fails.
dialer persistent
dialer persistent re-enable,
delay, dialer persistent initial
dialer string, dialer
Possible Default
Values Value