Map-Class Frame-Relay - Avaya G250 Reference

CLI Commands
User level
read-write
Context
Interface: Controller (T1)
Example
To request that a loopback signal be sent with payload information:
G350-001(if:Serial 5/1)# loopback remote payload
Related commands
loopback diag,

map-class frame-relay

Use the map-class frame-relay command to create a QoS template named
map_class_name, which can later be assigned to DLCIs.
Use the no form of this command to delete a map class.
Note:
This command fails if the map class is currently associated with a DLCI.
Note:
Syntax
[no] map-class frame-relay map_class_name
Parameters
Parameter
map_class_name
User level
read-write
Context
general
326 Avaya G250 and Avaya G350 CLI Reference
loopback local
Description
The name of a map class configured by the user
Possible Default
Values Value