Set Port Redundancy On|Off - Avaya G250 Reference

CLI Commands

set port redundancy on|off

Use the set port redundancy on|off command to define or remove redundancy pairs. A
redundancy port acts as a backup port in case the primary port fails. The port can be any port
that does not belong to a LAG or a LAG interface. Ensure that there is no redundancy scheme
already defined on any of the ports.
Note:
This command is not supported by the G250.
Note:
Syntax
set port redundancy prim_module/prim_port second_module/second_port
{on|off} [redundancy_name]
Parameters
Parameter
prim_module
prim_port
second_module
second_port
on
off
redundancy_name
User level
read-write
Context
general
Example
To specify that port 12 of module 4 acts as a backup port for port 7 on module 3, and to name
the redundancy pair red1:
G350-147# set port redundancy 3/7 4/12 on red1
red1: Port 4/12 is redundant to port 3/7.
Port redundancy is active - entry is effective immediately
458 Avaya G250 and Avaya G350 CLI Reference
Description
The module number of the primary port
Primary port of the redundancy scheme
The module number of the backup port
Backup port of the redundancy scheme
Keyword specifying to define the
redundancy pair
Keyword specifying to remove the
redundancy pair
Name for the redundancy scheme
Possible Default
Values Value