Show Date-Format - Avaya G250 Reference

show date-format

Use the show date-format command to display the current date format in effect for the SLS
data set in the G250.
Note:
This command is supported by the Avaya G250-Analog; it is not supported on the
Note:
G250-BRI or the G350.
Syntax
show date-format
User level
read-write
Context
You must be in the survivable-call-engine context before the show date-format command
will work.
Example
G250-001(super-survivable-call-engine)# show date-format
Date Format is mm/dd/yy
Related commands
add trunk-group,
trunk-group, remove
extension, set extension-password,
survivable-call-engine,
ip-codec-set, show
show trunk-group,
clear ars-fac, clear survivable-config,
trunk-group, save
set
set trunk-group,
last-pim-update, show
survivable-call-engine
Alphabetical listing of CLI commands
clear dial-pattern,
config, set ars-fac, set
ip-codec-set, set max-ip-registrations,
show ars-fac, show dial-pattern,
max-ip-registrations,
clear extension,
date-format, set dial-pattern,
set
show extension,
show survivable-call-engine,
Issue 1.1 June 2005
clear
set
show
545