Ip Rtp Non-Tcp-Mode - Avaya G250 Reference

CLI Commands

ip rtp non-tcp-mode

Use the ip rtp non-tcp-mode command to set the type of IP header compression to
perform. When set to ietf, the command performs IP header compression according to IPHC
RFCs. When set to non-ietf, the command performs IP header compression compatible with
other vendors, which do not strictly follow the RFCs.
Note:
ietf mode is incompatible with non-ietf mode.The default of the ip rtp
Note:
non-tcp-mode command is non-ietf.
Syntax
ip rtp non-tcp-mode {ietf | non-ietf}
Parameters
Parameter
ietf
non-ietf
User level
read-write
Context
Interface: Serial (DS1 PPP L2-L3, DS1 PPP L2, DS1 FR-SUB L2-L3, DS1 FR-SUB L2, USP
PPP L2, USP PPP L2-L3)
Example
To set the Serial interface to perform IPHC RFC header compression:
G350-001(if:Serial 2/1:1.1)# ip rtp non-tcp-mode ietf
Related commands
clear ip rtp header-compression,
compression-connections,
port-range, ip tcp
header-compression
284 Avaya G250 and Avaya G350 CLI Reference
Description
Keyword specifying ietf mode
Keyword specifying non-ietf mode
clear ip tcp
ip rtp header-compression,
compression-connections,
brief, show ip tcp header-compression
header-compression,
ip rtp max-period,
show ip rtp header-compression,
Possible Default
Values Value
ip rtp
ip rtp max-time,
show ip rtp
ip rtp