Set Spantree Forward-Delay - Avaya G250 Reference

Related commands
set port spantree,
spantree priority,
hello-time, set spantree
version, show spantree

set spantree forward-delay

Use the set spantree forward-delay command to specify the time used when
transferring the state of a port to the forwarding state.
Note:
This command is not supported by the G250.
Note:
Syntax
set spantree forward-delay seconds
Parameters
Parameter
seconds
User level
read-write
Context
general
Example
To specify a forward delay of 25 seconds:
G350-001(super)# set spantree forward-delay 25
bridge forward delay is set to 25.
Related commands
set port spantree,
spantree priority,
hello-time, set spantree
version, show spantree
set port spantree cost,
set spantree default-path-cost,
max-age, set spantree
Description
The value must exceed
(Bridge Max Age / 2). The recommended
value is 15
set port spantree cost,
set spantree default-path-cost,
max-age, set spantree
Alphabetical listing of CLI commands
set port spantree force-protocol-migration,
set spantree forward-delay,
priority, set spantree
set port spantree force-protocol-migration,
set spantree enable/disable,
priority, set spantree
set port
set spantree
tx-hold-count, set spantree
Possible Default
Values Value
4-30
set port
set spantree
tx-hold-count, set spantree
Issue 1.1 June 2005 491