Snmp-Server Group - Avaya G250 Reference

CLI Commands
User level
admin
Context
general
Example
G350-001(super)# snmp-server engineid 00:02:00:81:00:d0:00:4c:18:00
Related commands - SNMP access configuration
ip snmp-server,
snmp, show snmp
snmp user, show snmp user
community, snmp-server
view
Related commands - SNMP trap configuration
clear snmp trap,
enable notifications,
Related commands - Dynamic trap manager
snmp-server dynamic-trap-manager

snmp-server group

Use the snmp-server group command to define a new SNMPv3 group, or to configure
settings for the group. An SNMP group associates users with views. Use the no form of the
command to remove the specified group.
Note:
If you use the no form of the command with no additional parameters, all
Note:
instances of the specified group are removed. If you specify a particular security
group, only that group instance is removed.
Syntax
snmp-server group groupname {v1|v2c|v3 {auth|noauth|priv}} [read
readviewname] [write writeviewname] [notify notifyviewname]
no snmp-server group groupname [v1|v2c|v3 {noauth|auth|priv}]
742 Avaya G250 and Avaya G350 CLI Reference
set snmp community,
engineID, show snmp
summary,
group, snmp-server
set port trap, set snmp
snmp-server host,
set snmp retries, set snmp
group, show snmp
show snmp usertogroup,
remote-user, snmp-server
trap, show snmp, snmp trap
snmp-server informs
timeout, show port
retries, show snmp timeout,
show snmp view,
user, snmp-server
link-status, snmp-server
trap, show
show
snmp-server