Icmp - Avaya G250 Reference

icmp

Use the icmp command to specify that the current rule applies to a specific type of ICMP
packet. Use the no form of this command to specify that the rule applies to all packets except
those of the specified ICMP type.
Note:
The icmp command also sets the IP protocol to ICMP.
Note:
Syntax
[no] icmp {name | {icmp_type icmp_code}}
Parameters
Parameter
name
icmp_type
icmp_code
User level
read-write
Context
ip capture-list/ip-rule, ip access-control-list/ip-rule, ip pbr-list/ip-rule, ip qos-list/ip-rule
Example
To specify that rule 33 applies to any ICMP packet type except type 1 code 2:
G350-001(ACL 333/ip rule 33)# no icmp 1 2
To specify that rule 27 applies to ICMP error-reply packets:
G350-001(ACL 333/ip rule 27)# icmp Echo-Reply
Description
Specify that the rule
applies to this ICMP name
Specify that the rule
applies to this icmp type
Specify that the rule
applies to this icmp code
Alphabetical listing of CLI commands
Possible Values
For an ip-rule: 0-256
For a QoS rule: 0-65535
For an ip-rule: 0-256
For a QoS rule: 0-65535
Issue 1.1 June 2005
Default
Value
207