CLI Commands
show fragment
Use the show fragment command to display information about IP packets that are passing
from or to the router.
Note:
No IP reassembly is performed on packets in transit through the router.
Note:
Syntax
show fragment
User level
read-only
Context
general
Example
To display fragmented IP packets information:
G350-001(super)# show fragment
Max number of concurrently reassembled packets is 100
Max number of fragments per packet is 64
Fragment timeout is 10 sec
Number of packets waiting to be reassembled is 0
Number of successfully reassembled packets is 11954
Number of packets which failed to be reassembled is 0
Number of packets which overflowed the database is 0
Related commands
clear
fragment,
show frame-relay fragment
Use the show frame-relay fragment command to display frame-relay fragmentation
statistics and configuration on all PVCs, all PVCs associated with an interface, or a specific
PVC.
Note:
When statistics for multiple PVCs are shown, they are sorted first by interface
Note:
type and number, and then by DLCI.
560 Avaya G250 and Avaya G350 CLI Reference
fragment
chain,
fragment
size,
fragment timeout