Set Port Dot1X Re-Authentication - Avaya G250 Reference

set port dot1x re-authentication

Use the set port dot1x re-authentication command to set the re-authentication
mode per port.
Syntax
set port dot1x re-authentication mod/port {enable | disable}
Parameters
Parameter
mod
port
enable
disable
User level
admin
Context
general
Example
G350-001(super)# set port dot1x re-authentication 1/2 enable
Port 1/2 re-authentication enabled.
Related commands
clear dot1x config,
server-timeout,
system-auth-control
port-control, set port dot1x
statistics
Description
Number of the module
Number of the port on the
module
Keyword to enable
automatic re-authentication
Keyword to disable
automatic re-authentication
set dot1x max-req,
set dot1x supp-timeout,
enable, set dot1x
re-authenticate,
Possible
Values
set dot1x quiet-period,
set dot1x system-auth-control
tx-period, set port dot1x
show dot1x, show port
Alphabetical listing of CLI commands
Default Value
disable
set dot1x re-authperiod,
disable, set dot1x
initialize, set port dot1x
dot1x, show port dot1x
Issue 1.1 June 2005
set dot1x
439