Set Spantree Hello-Time - Avaya G250 Reference

CLI Commands

set spantree hello-time

Use the set spantree hello-time command to specify the time interval between the
generation of configuration BPDU's by the root.
Note:
This command is not supported by the G250.
Note:
Syntax
set spantree hello-time seconds
Parameters
Parameter
seconds
User level
read-write
Context
general
Example
To specify spanning tree hello time is 2 seconds:
G350-401# set spantree hello-time 2
bridge hello time is set to 2.
Related commands
set port spantree,
spantree priority,
forward-delay,
spantree version,
492 Avaya G250 and Avaya G350 CLI Reference
Description
The value must not exceed
(Bridge Max Age / 2) - 1. The recommended
value is 2.
set port spantree cost,
set spantree default-path-cost,
set spantree max-age,
show spantree
set port spantree force-protocol-migration,
set spantree
set spantree priority, set spantree
Possible Default
Values Value
1-10
enable/disable, set spantree
tx-hold-count,
set port
set