Set Ip-Codec-Set - Avaya G250 Reference

User level
read-write
Context
general
Related commands
clear mgc list, session,
mediaserver, show

set ip-codec-set

Use the set ip-codec-set command to configure an IP codec set within the SLS data set
on the G250.
Note:
This command is supported by the Avaya G250-Analog; it is not supported on the
Note:
G250-BRI or the G350.
Note:
When you use this command, silence is set to no, and the frame size is set to
Note:
20 mSec.
Syntax
set ip-codec-set codec
Parameters
Parameter
codec
User level
read-write
Context
You must be in the survivable-call-engine context before the set ip-codec-set command
will work.
set mediaserver, set mgc
mgc, show mgc list
Description
Codec type
Alphabetical listing of CLI commands
list, set reset-times, show
Possible
Values
g.711mu
g.711a
icc-monitoring, show
Default
Value
Issue 1.1 June 2005 411