Ip Rtp Header-Compression - Avaya G250 Reference

ip rtp header-compression

Use the ip rtp header-compression command to enable both RTP and TCP header
compression on the current interface. Use the no form of this command to disable both RTP
and TCP compression on the current interface.
Note:
The ip rtp header-compression command always overrides the ip tcp
Note:
header-compression command. Both commands enable TCP header
compression, but they differ in the methods employed.
Note:
If TCP compression was enabled on the current interface using the ip tcp
Note:
header-compression command and not the ip rtp
header-compression command, then no ip rtp header-compression
does not disable TCP compression on the interface.
Syntax
[no] ip rtp header-compression
User level
read-write
Context
Interface: Serial (DS1 PPP L2-L3, DS1 PPP L2, DS1 FR-SUB L2-L3, DS1 FR-SUB L2, USP
PPP L2, USP PPP L2-L3)
Example
To enable RTP and TCP header compression on a serial interface:
G350-001(config-if:Serial 2/1:1.1) ip rtp header-compression
Related commands
clear ip rtp header-compression,
compression-connections,
port-range, ip tcp
header-compression
clear ip tcp
ip rtp max-period,
compression-connections,
brief, show ip tcp header-compression
Alphabetical listing of CLI commands
header-compression,
ip rtp max-time, ip rtp
show ip rtp header-compression,
ip rtp
non-tcp-mode, ip rtp
show ip rtp
Issue 1.1 June 2005 281