Wait-Interval - Avaya G250 Reference

CLI Commands

wait-interval

Use the wait-interval command to specify how long to wait for a device to answer an RTR
probe. When the wait-interval is exceeded, the probe is considered an unanswered probe.
Use the no form of this command to restore the value to the default.
Note:
The value of wait-interval cannot be greater than the value of frequency.
Note:
Syntax
[no] wait-interval wait-value [seconds | milliseconds]
Parameters
Parameter
wait-value
seconds
milliseconds
User level
read-write
Context
rtr type
Example
G350-001(config-rtr icmp 1)# wait-interval 3 seconds
Related commands
dscp (object tracking), fail-retries, frequency,
success-retries,
798 Avaya G250 and Avaya G350 CLI Reference
Description
A number indicating how
long to wait for a response
to the probe before
considering it an
unanswered probe.
Keyword indicating to set
the wait interval in units of
seconds
Keyword indicating to set
the wait interval in units of
milliseconds
type
Possible Values
1-60 seconds
or
1000-60,000
milliseconds
next-hop (object tracking), rtr, source-address,
Default Value
Same as
current value
of
frequency