Set Qos Signal - Avaya G250 Reference

CLI Commands
User level
read-write
Context
general
Example
To set the monitoring IP address to 132.123.23.12:
G350-001(super)# set qos rtcp monip 132.123.23.12
To set the reporting period to 10 seconds:
G350-001(super)# set qos rtcp reportper 10
To set the listening port number to 5000:
G350-001(super)# set qos rtcp listenport 5000
To enable reporting capability:
G350-001(super)# set qos rtcp enable
Related commands - RTCP
show qos-rtcp

set qos signal

Use the set qos signal command to provide the means to set up QoS signaling
parameters, DSCP or 802.1Q, for the Media Gateway Processor.
Syntax
set qos signal {dscp | 802p} value
Parameters
Parameter
dscp
802p
value
476 Avaya G250 and Avaya G350 CLI Reference
Description
Keyword that specifies to
setup DSCP parameters
Keyword that specifies to
setup 802.1Q parameters
Parameter value
Possible Values Default Value
For dscp: 0-63 For dscp: 34
For 802p: 0-7 For 802p: 7