Ip Simulate - Avaya G250 Reference

CLI Commands

ip simulate

Use the ip simulate command to test the action of a policy on a simulated packet.
Syntax
ip simulate policy_list_number direction [priority] [dscp_value]
source destination [protocol [source_port
destination_port [established]]]
Parameters
Parameter
policy_list_
number
direction
priority
dscp_value
source
destination
protocol
source_port
destination_
port
established
User level
read-write
Context
Interface: Serial (DS1 PPP L2, DS1 PPP L2-L3, DS1 FR-SUB L2, DS1 FR-SUB L2-L3, USP
PPP L2, USP PPP L2-L3), Loopback (L2, L2-L3), FastEthernet (L2-L3, L3), Tunnel (L2, L2-L3),
VLAN (L2, L2-L3)
286 Avaya G250 and Avaya G350 CLI Reference
Description
The number of the policy
The direction
The priority
The source IP address
The destination IP address
The protocol to use
The source port of the
simulated packet
The destination port of the
simulated packet
The value of the TCP
established bit
Possible Values
1-999
in, out
fwd0-fwd7
dscp0-dscp63
ip, tcp, udp, 1-255
1-65535
1-65535
Default Value
For PBR: 1
For ACL: 300
For Qos: 400
For Capture:
500