Ds-Mode - Avaya G250 Reference

ds-mode

Use the ds-mode command to specify the mode of the controller.
Note:
When you change the ds-mode, you must copy the running configuration to the
Note:
startup configuration and reset the device.
Syntax
ds-mode {e1|t1}
Parameters
Parameter
e1
t1
User level
admin
Context
general
Example
To set the controller to operate in E1 mode:
G350-001(super)# ds-mode t1
To change ds-mode, copy the running configuration to the start-up configuration file, and reset
the device.
Related commands
cablelength long,
serial, ip address,
Description
Keyword specifying to set the mode to E1
Keyword specifying to set the mode to T1
cablelength short, channel-group,
linecode (E1), linecode
Alphabetical listing of CLI commands
clock source, controller, framing,
(T1), remote, show controllers,
Possible Default
Values Value
interface
show ds-mode
Issue 1.1 June 2005 177