Ip Default-Gateway - Avaya G250 Reference

User level
read-write
Context
general
Example
G350-001(super)# ip crypto-list 901
G350-001(Crypto 901)#
Related commands
crypto ipsec transform-set,
isakmp policy,
protect crypto map, source-ip,

ip default-gateway

Use the ip default-gateway command to define a default gateway (router). Use the no
form of this command to remove the default gateway.
Syntax
ip default-gateway {ip_address | {interface_type interface_number}}
[cost] [preference] [permanent]
no ip default-gateway
Parameters
Parameter
ip_address
interface_type
interface_number
cost
preference
permanent
crypto map,
description (ip rule), destination-ip,
show ip
Description
The IP address of the router
The interface type
The interface number
The path cost
The preference
Keyword that specifies not to disable
the router if the interface is down
Alphabetical listing of CLI commands
crypto isakmp peer, crypto isakmp
ip-rule (VPN),
active-lists, show ip crypto-list
peer-group,
ip crypto-group, local-address,
Possible Default
Values Value
1
High, Low Low
Issue 1.1 June 2005
crypto
231