Fragment - Avaya G250 Reference

CLI Commands

fragment

Use the fragment command to apply the current policy operation to packet fragments, not
including initial fragments.
Syntax
fragment
User level
read-write
Context
ip qos-list composite-operation, ip capture-list ip-rule, ip pbr-list ip-rule,
ip access-control-list ip-rule, ip qos-list ip-rule
Example
G350-???(super-Capture 520/ip rule 15)# fragment
Related commands - Packet sniffing
dscp (policy, policy-based routing, packet
capture-list, source-ip,
source-port
Related commands - Policy-based routing
dscp (policy, policy-based routing, packet
routing), show ip
Related commands - Policy
composite-operation,
show composite-operation,
source-port, udp
190 Avaya G250 and Avaya G350 CLI Reference
tcp destination-port,
next-hop-list, show ip-rule
dscp (policy, policy-based routing, packet
show ip-rule, source-ip,
destination-port, udp source-port, cos,
sniffing), destination-ip, icmp, ip-protocol,
tcp source-port, udp
sniffing), destination-ip,
tcp destination-port,
name
show ip
destination-port, udp
next-hop (policy-based
sniffing), destination-ip, icmp,
tcp established, tcp