Set Security-Association Lifetime - Avaya G250 Reference

set security-association lifetime

Use the set security-association lifetime command to set the IKE phase 2 (IPSec)
SA (security-association) lifetime. Use the no form of the command to disable the SA lifetime.
Syntax
[no] set security-association lifetime { seconds seconds | kilobytes
{kilobytes | disable} }
Parameters
Parameter
seconds
seconds
kilobytes
kilobytes
disable
User level
read-write
Context
crypto ipsec transform-set
Example
G350-001(config-transform:ts1)# set security-association lifetime
seconds 300
Related commands
crypto ipsec transform-set, mode,
Description
Specify the lifetime in seconds
The lifetime, in seconds
Specify the lifetime by the amount
of traffic that should pass through
the IPSec tunnel before the
security association should time
out.
The amount of traffic, in kilobytes
Unlimited lifetime
set pfs, show crypto ipsec transform-set
Alphabetical listing of CLI commands
Possible Values
120-86,400
2,560-536,870,912
Issue 1.1 June 2005
Default
Value
483