Ip Qos-List - Avaya G250 Reference

CLI Commands
User level
read-write
Context
Interface: Serial (DS1 PPP L2, DS1 PPP L2-L3, DS1 FR-SUB L2, DS1 FR-SUB L2-L3, USP
PPP L2, USP PPP L2-L3), FastEthernet (L2, L2-L3), VLAN (L2, L2-L3), Loopback (L2, L2-L3),
Tunnel (L2, L2-L3)
Example
To apply QoS list 440 to all incoming packets on the Vlan 1 interface:
G350-001(if:Vlan 1)# ip qos-group 440 in
Related commands
ip access-control-list,
pre-classification,

ip qos-list

Use the ip qos-list command to enter configuration mode for the specified QoS list. If the
QoS list does not exist, the system creates it and enters its configuration mode.
Syntax
ip qos-list list_number
Parameters
Parameter
list_number
User level
read-write
Context
general
270 Avaya G250 and Avaya G350 CLI Reference
ip access-group, ip
show ip access-control-list,
Description
The policy list number
policy-list-copy, ip qos-list,
show ip qos-list
ip simulate,
Possible Default
Values Value
400-499 400